ESP8266-DevKitC
Introduction:
ESP8266-DevKitC is a compact development board based on esp8266 module design. all available pins of the module on the board have been connected to the row buses on both sides of the development board, allowing users to connect with abundant peripherals to meet various scenarios.
Learn more: https://www.espressif.com/en/support/documents/technical-documents?keys=ESP8266-DevKitC
Interface description:
- 5V to 3.3V LDO
Equipped with LDO with maximum output of 800 mA, it supplies power to ESP8266 module and the peripherals of the household.
- Dial switch toggle switch
Switching between dynamic download and flow control functions
-Bit1=OFF, Bit2=ON, select the dynamic download function;
-Bit1=ON, Bit2=OFF, select the flow control function.
Bit1 and Bit2 cannot be turned ON at the same time
- USBtoUART Bridge
Serial conversion core realizes conversion between serial and USB protocol, and the maximum baud rate can reach 3 Mbps.
- Boot Button
Download mode button. Press Boot Button and EN Button in turn, and then release EN Button and Boot Button one by one. The system enters download mode and the user can start burning system firmware.
- Micro USB Port
It can supply power to the development board and also serve as the communication connection between PC and the development board.
- EN Button
Reset button. Press this button to reset the system.
- I/O Connector
All pins of ESP8266 module can be connected to two rows, and users can configure different functions based on their needs
- Comments(0)
You might like
ESP8266-DevKitC
Out of stock
