Product Description
ESP32 Cam WiFi Bluetooth Module Development Board with OV2640 Camera Module
Specifications
- Model: ESP32-CAM
- Color: Black
- Size: 27 x 40.5 x 4.5mm
- SPI Flash: Default 32Mbit
- RAM: Internal 520KB+ External 4M PSRAM
- Serial portRate: Default 115200 bps
- Image Output Format: JPEG(Only OV2640 support), BMP. GRAYSCALE
- Spectrum Range: 2412-2484MHz
- Antenna Form: Onboard PCB antenna, gain 2dBi
- Safety: WPA/WPA2/WPA2-Enterprise/WPS
- Power Supply Range: 5V
- Operating Temperature: -20 ~85 degree celsius
- Current: 2A
Highlights
- ESP32-CAM is a WIFI&Bluetooth dual-mode development board, which uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
- ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with two high-performance 32-bit LX3 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor and so forth.
- Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.
- ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
- Low-power dual-core 32-bit CPU for application processors.
Features
- Built-in 520 KB SRAM, external 4M PSRAM; Transmit power: 802.11b: 17+/-2 dBm (@11Mbps), 802.11g: 14+/-2 dBm (@54Mbps), 802.11n: 13+/-2 dBm (@MCS7)
- Main frequency up to 240MHz, computing power up to 600 DMIPS.
- Built-in 520 KB, external 4M.
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
- Support OV2640 and OV7670 cameras, built-in flash.
- Support image WiFi upload.
- Support TF card.
- Support multiple sleep modes.
- Embedded Lwip and Free RTOS.
- Support STA/AP/STA+AP working mode.
- Support Smart Config/AirKiss one-click distribution network.
- Support secondary development.
What is in the Package
- 1 x ESP32-CAM Development Board
- 1 x OV2640 Camera
- Comments(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
