This project was made by me from the beginning and has improved over time, the goal are the robotic's competitions at the international level, and to highlight the name of the IPN, the application of ...
Developing a system to detect various characteristics such as IR and RF frequency
Andy Rubiano? HBBPFC international final project PCBs. #AndyRubiano @RubianoAndy ?????????? Thanks PCBWay Anson Bao Follow me: @RubianoAndy (Instagram and Twitter). Facebook: Andy Rubiano
This board contain a custom socket for testing packages before production.
Amplifier 5.1 Channel for Surround Sound. as power amplifier from surround audio processor prologic II. for each channel as subwoofer using TDA7294 BTL mode 160 watt, channel front, rear, and center p...
Small breakout for microcontroller interfaces (i2c spi and uart).
This is a hobby project consisting in a multi-copter flight controller. In the past, tests were done with external ITG/MPU gyroscope module; this time, it is built-in in the pcb together with a magnet...
Project contains three different PCbs. The big one (black soldermask) is the main board with Gsm M95 Quectel Chip. There are also Uart transsmision provided on the board, Sim interface and battery sup...
The buck converter is a dc to dc power electronics topology which can provide an output voltage lower than the one at the input. Buck converters are used in many low voltage regulated power supplies u...
a machine that assemble and tests electrical harnesses on production process and alarm for faults for ex: shorted wires ,cut wires ,inverted wires , a complete harness analysis software gets printed ...
Interface board that accommodate single or dual package sensing devices
We are building an electric Formula style racecar for the Formula SAE competition in the USA. This board is for monitoring our battery's voltage and temperatures.
Dolby Prologic Surround Decoder 5.1 Channel Audio Processor SSM2126A. Audio processing from stereo audio signal into surround mode 5.1 channel using chipset SSM2126A from analog devices. i modified...
This project uses the Particle Photon to control the Phase Angle of a mains operated (115-240VAC) appliance. In addition to an onboard potentiometer to control the phase angle, one can use Wi-Fi or Bl...
To read chipless RFID tag from far distance.
This board is part of an IoT project. The relay will control remote lamps around the house. Integrated arduino and 1wire protocol for communication with other devices