Product Description
Universal e-Paper Raw Panel Driver Shield（Arduino/NUCLEO）
Overview
This is a universal driver board for connecting Arduino/NUCLEO and e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare.
Features
- Standard Arduino connectivity, compatible with host boards like UNO, Leonardo, NUCLEO, XNUCLEO
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Onboard external RAM, more available space
- Micro SD slot, images can be stored on TF card for displaying
- Reserved control interface, for connecting with other control boards/li>
- Comes with development resources and manual (examples for Arduino/STM32)
Specifications
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI (default)
- RAM size: 1M-bit / 128K-byte
- Outline dimension: 53.34mm × 53.34mm
Interface
VCC——5V——Power
GND——GND——Ground
SCK ——SCK——SPI clock input
MOSI——MOSI——SPI data input
MISO——MISO——SPI data output
EPD_CS——D10——e-Paper chip selection
EPD_DC——D9——e-Paper data/command
EPD_RST——D8——e-Paper reset
EPD_BUSY——D7——e-Paper busy
SD_CS——D6——SD card chip selection
SPIRAM_CS——D5——SPI RAM chip selection
Dimensions
- Comments(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89Redeem Now -
-
-
-
-
-
-
OV2640 Camera Module 200W Pixel STM32F4 Driver Source Code Support JPEG Out P4M71000 BeansRedeem Now -
Mini Traffic Light 5V LED Display Module Red Green Yellow Light for Arduino Raspberry Pi100 BeansRedeem Now -
-
-
-
-
-
4.2inch NFC-Powered e-Paper Evaluation Kit, Wireless Powering & Data Transfer10800 BeansRedeem Now -
7.5inch NFC-Powered e-Paper Evaluation Kit, Wireless Powering & Data Transfer13800 BeansRedeem Now -
