Two-axis Key Rocker Sensor
Product introduction:
The PS2 biaxial button rocker module adopts the original high-quality metal button rocker potentiometer on the PS2 gamepad. The module is specially equipped with two analog output interfaces and one digital output interface. The output values correspond to (X, Y) biaxial offset respectively, and the type is analog. The key indicates whether the user presses on the Z axis, and its type is digital switch value. The module is integrated with a power indicator, which can display the working status. Clear, concise and accurate positioning of coordinate identifiers; It can easily control the movement of objects (such as two-degree-of-freedom steering gear pan/tilt) in two-dimensional space, so it can be programmed by Arduino controller and plugged by sensor expansion board to complete creative remote control interactive works.
Product Details：
1. Input voltage range: DC 3.3V to 5V
2. Output signal: The module is specially equipped with two analog output interfaces and one digital output interface, and the output values correspond to (X, Y) biaxial offset respectively, which is analog; The key table shows whether the user presses on the Z axis, and its type is digital switch value.
3. You can use Arduino. Controller programming, sensor expansion board plug-in, complete creative remote control interactive works.
4. The cross rocker is a bidirectional 10K resistor, and the resistance value of the tap changes with the direction of the rocker. The module is powered by 5V. in the original state, the reading voltage of x and ya is about 2.5V when pressed in the direction of arrow, the reading voltage increases and reaches 5v. When the arrow is pressed in the opposite direction, the read-out voltage value decreases, and the limit is 0V.
- Comments(0)
You might like
-
-
-
-
-
-
-
Microphone Module I2S Interface Inmp441 Mems High Precision Low Power Ultra Small Volume500 BeansRedeem Now -
-
-
-
-
-
-
-
-
-
-
Two-axis Key Rocker Sensor
Out of stock
