Product Description
Raspberry Pi High Quality Camera
Describtioin:
The High Quality Camera Module is a camera sensor designed to accept CS-mount lenses and, with the supplied adapter, C-mount lenses for use with the Raspberry Pi single board computer line. It offers higher resolution (12 megapixels, compared to eight megapixels), and sensitivity (approximately 50% greater area per pixel for improved low-light performance) than the existing Camera Module v2. The 12.3 megapixel Sony IMX477 sensor features a 7.9mm diagonal image size and back-illuminated sensor architecture with adjustable back focus. Additionally, this module features an included tripod thread just adjacent to the ribbon cable connector.
FEATURES
- 12.3MP high quality camera
- 7.9mm diagonal image size
- Up to 12-bit RAW
- Adjustable back focus
- Integrated 1/4"-20 tripod mount
- Compatible with C-mount and CS-mount lenses (adapter included)
- Compatible with Raspberry Pi 1/2/3/4 boards
- 200 mm ribbon cable included
SPECIFICATIONS
- Sensor: Sony IMX477R stacked, back-illuminated sensor, 12.3 megapixels, 7.9 mm sensor diagonal, 1.55 μm × 1.55 μm pixel size
- Output: RAW12/10/8, COMP8
- Back focus: Adjustable (12.5 mm–22.4 mm)
- Lens standards: C-mount, CS-mount (C-CS adapter included)
- IR cut filter: Integrated (Can be removed to enable IR sensitivity. Modification is irreversible.)
- Ribbon cable length: 200 mm
- Tripod mount: 1/4”-20
- Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device
- Electromagnetic Compatibility Directive (EMC) 2014/30/EU
- Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
- Production lifetime: The Raspberry Pi High Quality Camera will remain in production until at least January 2026
- Comments(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
-
-
I2C Interface Of Raspberry Pi Serial Port Expansion Board (expanding 2 UART and 8 GPIO)1800 BeansRedeem Now
-
-
-
-
-
-
-
-
-
-
-