RP2040 Development Board with 0.96" LCD And Pin Header
Product Features
RP2040-LCD-0.96 is a low-cost, high-performance microcontroller development board based on Raspberry Pi RP2040, with flexible digital interface. Like the Raspberry Pi Pico, the hardware uses the RP2040 microcontroller chip independently developed by the Raspberry Pi, and the software can choose the C/C++ SDK provided by the Raspberry Pi, or use MicroPython for development, which is convenient for quick entry and development. and embedded in the product. Not only that, it also has a 0.96-inch IPS display, a lithium battery charging and discharging interface, and a high-efficiency DC-DC buck-boost chip.
Main functional features
- Adopt the RP2040 microcontroller chip officially designed by Raspberry Pi
- Equipped with dual-core ARM Cortex M0+ processor running at up to 133MHz flexible clock
- Built-in 264KB SRAM and 2MB on-chip Flash
- Adopt Type-C interface, keep up with the trend of the times, no need to worry about positive and negative insertion
- Onboard 0.96-inch 160X80 pixel 65K color IPS LCD display
- The on-board lithium battery charging and discharging interface is beneficial to the use of this product in some mobile scenarios
- Onboard DC-DC chip TPS63000, high-efficiency DC-DC buck-boost with 1.8A current switch chip
- Stamp hole design, which can be directly welded and integrated into the bottom plate designed by the user (due to the
- components, the bottom slot needs to be embedded)
- USB1.1 host and device support
- Supports low power sleep and hibernate modes
- Drag-and-drop program download via USB recognized as mass storage
- Up to 26 multi-function GPIO pins
- 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels
- Accurate on-chip clocks and timers
- Temperature Sensor
- On-chip accelerated floating-point library
- 8 programmable I/O (PIO) state machines for custom peripheral support
Recourse
1. USB Type-C interface
2. BOOT button
Press while crossing to enter scroll down mode
3. RESET reset button
4.0.96 inch IPS LCD display
Resolution 160 X 80, 65K color
5. Battery interface
MX1.25 connector, can be used to connect 3.7V lithium battery, support charging and discharging
6. TPS63000
Language efficiency DC-DC buck-boost chip
7. ETA6096
High-efficiency lithium battery charging chip
8. RP2040
Dual-core processor running at up to 133MHz
9. W25Q16JVUXIQ
2MB NOR-Flash
10.DEBUG interface
11. Pin interface
Compatible with Raspberry Pi Pico standard interface
- Comments(0)
You might like
-
-
-
-
I2C Interface Of Raspberry Pi Serial Port Expansion Board (expanding 2 UART and 8 GPIO)1800 BeansRedeem Now -
-
-
-
-
-
-
-
-
-
-
RP2040 Development Board with 0.96" LCD And Pin Header
Out of stock
